Juniper SRX1500 Hardware Manual Download Page 83

Page: 83 / 168

CHAPTER 16

Providing Power to the SRX1500 Services
Gateway

•

Connecting the SRX1500 Services Gateway to an AC Power Supply on page 65

•

Connecting an AC Power Cord to the SRX1500 Services Gateway on page 66

•

Connecting the SRX1500 Services Gateway to a DC Power Supply on page 67

•

Powering On the SRX1500 Services Gateway on page 68

•

Powering Off the SRX1500 Services Gateway on page 69

Connecting the SRX1500 Services Gateway to an AC Power Supply

CAUTION:

Do not mix AC and DC power supplies within the same services

gateway. Damage to the device might occur.

You connect AC power to the services gateway by attaching the power cord from the AC
power source to the AC appliance inlet located on the power supply.

To connect the services gateway to an AC power supply:

Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
the strap to the ESD point on the front of the chassis.

Insert the appliance coupler end of the power cord into the appliance inlet on the
power supply.

Insert the power cord plug into an external AC power source receptacle.

Summary of Contents for SRX1500
















































































































































Search results

Summary of Contents for SRX1500

Reviews:

Juniper SRX1500, Hardware Manual, Page: 83 / 168

Search results

Summary of Contents for SRX1500

Reviews: