STRM Installation Guide
Installing STRM Using Red Hat Enterprise 4.6
21
Step 15
To select the time zone continent:
a
Using the up/down arrow keys, or the page up/page down keys, select your
time zone continent or area.
b
Using the left/right arrow keys, select Next, then press
Enter
.
The Time Zone Region window appears.
Note: The options that appear in this window are relevant to the continent or area
previously selected.
c
Using the up/down arrow keys, or the page up/page down keys, select your
time zone region.
d
Using the left/right arrow keys, select Next. Press
Enter
.
The Configure STRM window appears.
Step 16
To configure the STRM network settings:
a
You must change the displayed default values. Using the up/down arrow keys
to navigate the fields, enter values for the following parameters:
-
Hostname
- Specify a fully qualified domain name as the system hostname.
-
IP Address
- Specify the IP address of the system.
-
Network Mask
- Specify the network mask address for the system.
-
Gateway
- Specify the default gateway of the system.
