Juniper QFX5110, Hardware Manual

Page: 218 / 222

•
EN 55024
• CISPR 24
Related
Documentation
Compliance Statements for EMC Requirements for the QFX Series on page 198
•
Compliance Statements for EMC Requirements for the QFX Series
This topic describes the EMC requirements for the QFX Series for:
•
Canada on page 198
•
European Community on page 199
• Israel on page 199
• Japan on page 199
•
Korea on page 199
•
United States on page 200
• Nonregulatory Environmental Standards on page 200
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
The Industry Canada label identifies certified equipment. This certification means that
the equipment meets certain telecommunications network protective, operational, and
safety requirements. Industry Canada does not guarantee the equipment will operate to
the users’ satisfaction.
Before installing this equipment, users should ensure that it is permissible to connect the
equipment to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. In some cases, the
inside wiring associated with a single line individual service may be extended by means
of a certified connector assembly. The customer should be aware that compliance with
the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
CAUTION: Users should not attempt to make electrical ground connections
by themselves, but should contact the appropriate inspection authority or
an electrician, as appropriate.
Copyright © 2017, Juniper Networks, Inc. 198
QFX5110 Switch Hardware Guide