See the complete QFX3100 documentation at
.
Safety Warnings Summary
This is a summary of safety warnings. For a complete list of warnings, including translations, see the QFX3100 documentation
at
.
WARNING:
Failure to observe these safety warnings can result in personal injury or death.
•
Permit only trained and qualified personnel to install or replace device components.
•
Perform only the procedures described here and in the QFX Series documentation. Other services must be performed
only by authorized service personnel.
•
Before installing the device, read the planning instructions in the QFX Series documentation to make sure that the site
meets power, environmental, and clearance requirements for the device.
•
Before connecting the device to a power source, read the installation instructions in the QFX3100 Director device
documentation.
•
z A fully loaded QFX3100 Director device weighs approximately 41.2 lb (18.73 kg). Manually installing the device in a
rack or cabinet requires one person to lift the device and a second person to install the mounting screws. To prevent
injury, keep your back straight and lift with your legs, not your back.
•
If the rack or cabinet has stabilizing devices, install them in the rack before mounting or servicing the device in the rack
or cabinet.
•
Before installing or after removing an electrical component, always place it component-side up on a flat antistatic mat
or in an antistatic bag.
•
Do not work on the device or connect or disconnect cables during electrical storms.
•
Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces, and watches.
Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the
terminals.
Power Cable Warning (Japanese)
The attached power cable is only for this product. Do not use this cable for another product.
7
