Juniper PTX, Quick Start Manual, Page: 5 / 6

4. To enter the administrative mode, log in as the root user with password Admin@123.
BPS>login
Username: root
Password: *********
Completed!
BPS>
5. You can use the CLI commands documented in the Optical Inline Amplifier Hardware Guide to configure, monitor, and
troubleshoot the optical ILA.
Step 3: Keep Going
IN THIS SECTION
Safety Warnings Summary | 5
Power Cable Warning (Japanese) | 6
Contacting Juniper Networks | 6
See the complete Optical Inline Amplifier documentation at
https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/ptx-series/ptx-ila/index.html .
Safety Warnings Summary
This is a summary of safety warnings. For a complete list of warnings, including translations, see the Optical Inline Amplifier
documentation at
https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/ptx-series/ptx-ila/index.html .
WARNING: Failure to observe these safety warnings can result in personal injury or death.
•
Only trained and qualified personnel are permitted to install or replace the optical ILA components.
•
Perform only the procedures described in this quick start and the optical ILA documentation. Other services must be
performed by authorized service personnel.
5