Juniper PTX, Quick Start Manual, Page: 4 / 6

Step 2: Up and Running
IN THIS SECTION
Set Parameter Values | 4
Perform the Initial Configuration | 4
Set Parameter Values
You must perform the initial configuration of the optical ILA through the console port. Before you begin, set the following
parameter values from the console server or PC:
•
Baud Rate—115200
•
Flow Control—None
•
Data—8
•
Parity—None
•
Stop Bits—1
•
DCD State—Disregard
Perform the Initial Configuration
To connect and configure the optical ILA from the console:
1. Connect the console port to a laptop or PC by using the provided RJ-45 cable and RJ-45 to DB-9 serial port adapter.
The console (CON) port is located on the management panel of the optical ILA.
2. Log in as the root user. Enter the default password root.
login: root
3. Start the command-line interface (CLI).
root@% localhost:~# /usr/bin/command
Welcome to ILA World
BPS>
4