background image

Quick Start Guide

NFX350 Network Services Platform Quick Start

IN THIS GUIDE

NFX350 Network Services Platform Overview | 1

NFX350 Front Panel and Rear Panel | 3

Mounting an NFX350 Device on Four Posts in a Rack or Cabinet | 3

Connect Power to the Device | 6

Factory-Default Settings | 7

Access the NFX350 Device | 7

Establish the Connection | 9

Next Steps | 10

Safety Warnings Summary | 10

Reference | 11

NFX350 Network Services Platform Overview

The Juniper Networks NFX350 Network Services Platform is a secure, automated, software-driven universal customer

premises equipment (uCPE) platform that delivers virtualized network and security services on demand. Leveraging Network

Functions Virtualization (NFV) and built on the Juniper Cloud CPE solution, NFX350 enables service providers to deploy

and chain multiple, secure, high-performance virtualized network functions (VNFs) on a single device.

The NFX350 is suited for large and extra-large deployments. The NFX350 is a high-end resilient uCPE platform that can

be used in secure SD-WAN and secure router deployments.

For more information on NFX350 Hardware, see the NFX350 Hardware Guide available at:

https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/

Summary of Contents for NFX350













Reviews: