Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1, Manual

Page: 29 / 170

Table 6: Data Centric API Operations (continued)
Queries the object.
Request:
• category = Schema name of the category (type = string).
• simpleQuery = Query expression (type = SimpleQueryType).
• dbVersionId= Version of the database (type = unsignedInt)
• objectFilter = Filter to be applied to the result (type = ObjectFilterType)
• view = Transformation of the object. For the default view, the returned object
follows the schema with no transformation (type = ViewType).
• property = Transformation parameters (type = NameValueType).
Response:
• queryId
• object
QueryObjectViewRequest
Resolves the object reference.
Request:
• objectReference = Object reference to be resolved (type = string)
•
dbVersionId= Version of the database (type = unsignedInt)
• objectFilter = Filter to be applied to the result (type = ObjectFilterType)
Response: object
ResolveObjectReferenceRequest
Job Service API
The Job Service API processes command directives to configure devices and display the
results. Table 7 on page 11 summarizes the API operations.
See “Job Service API WSDL” on page 121 for the Web Service Description Language
(WSDL) definition of the API.
Table 7: Job Service API Operations
Description Operation
Request to update the device configuration.
Request: JobRequestType
• jobName= Name of the job.
• scheduleTime= Time when the job will run. If not specified, the job will
run immediately.
• jobArgs= List of the devices to which the job applies (type =
JobArgsType).
Response: JobResponseType
• status = Job status.
• jobName = Name of the job.
• response = Response to the job.
UpdateDeviceRequest
11 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: NSM API Operations