Juniper MX480, Hardware Manual

Page: 95 / 420

ge-3/2/3 up down
ge-3/2/4 up down
ge-3/2/5 up down
ge-3/2/6 up down
ge-3/2/7 up down
ge-3/2/8 up down
ge-3/2/9 up down
ge-3/3/0 up down
ge-3/3/1 up down
ge-3/3/2 up down
ge-3/3/3 up down
ge-3/3/4 up down
ge-3/3/5 up down
ge-3/3/6 up down
ge-3/3/7 up down
ge-3/3/8 up down
ge-3/3/9 up down
See Also MX480 Router Hardware and CLI Terminology Mapping on page 35
•
MX480 Dense Port Concentrator (DPC) LEDs
Two LEDs, located on the craft interface above the DPC, display the status of the DPC
and are labeled
OK
and
FAIL
. For more information about the DPC LEDs on the craft
interface, see “DPC and MPC LEDs on the MX480 Craft Interface” on page 39 .
Each DPC also has LEDs located on the faceplate. For more information about LEDs on
the DPC faceplate, see the “LEDs” section for each DPC in the
MX Series Interface Module
Reference
.
See Also Maintaining MX480 DPCs on page 264
•
•
Replacing an MX480 DPC on page 269
DPCs Supported on MX240, MX480, and MX960 Routers
NOTE: These DPCs have all been announced as End of Life (EOL). The End
of Support (EOS) milestone dates for each model are published at
https://www.juniper.net/support/eol/mseries_hw.html
.
Table 56 on page 95 lists the DPCs supported by the MX240, MX480, and MX960 routers.
Table 56: DPCs Supported in MX240, MX480, and MX960 Routers
First Junos
OS Release
Maximum
Throughput
per DPC
Ports
DPC Model
Number
DPC Name
Gigabit Ethernet
95 Copyright © 2019, Juniper Networks, Inc.
Chapter 1: Overview