Juniper MX2010, Hardware Manual

Page: 625 / 825

Maintaining and Verifying the Status of the MX2010 Router Components
•
Maintaining the MX2010 Air Filters on page 609
•
Maintaining the MX2010 Air Vents on page 610
•
Maintaining the MX2010 Host Subsystem on page 647
•
Maintaining the MX2010 Control Boards on page 611
•
Maintaining the MX2010 Cooling System Components on page 613
•
Maintaining the MX2010 Cooling System Zones on page 627
•
Maintaining the MX2010 Fan Trays on page 615
•
Maintaining the Power Supply Modules on the MX2000 Line of Routers on page 666
•
Maintaining the MX2010 Power Usage on page 672
•
Maintaining the MX2010 Routing Engines on page 647
•
Maintaining the MX2010 SFB on page 680
•
Maintaining the MX2010 Switch Processor Mezzanine Board (SPMB) on page 681
•
Maintaining and Verifying the MX2010 Router Version on page 682
•
Maintaining and Verifying the Status of the MX2010 Craft Interface on page 684
Maintaining the MX2010 Air Filters
Purpose
For optimum cooling, verify the condition of the air filters.
Action
On a regular basis:
•
Check the air filters for dust and debris. Replace the filter elements. The filter elements degrade over
time, so the filter elements in use, as well as spares, must be replaced every 6 months.
CAUTION: Always keep the air filter in place while the router is operating. Because
the fans are very powerful, they could pull small bits of wire or other materials
into the router through the unfiltered air intake. This could damage the router
components.
609