Figure 12: Installing MX2008 Pallet Jack Attachment
g000017
Use the Pallet Jack with Attachment to Install the Router
Before installing the router, you must remove all components (see
). To install the router using a pallet jack with attachment:
1.
Ensure that the rack or cabinet is in its permanent location and is secured to the
building. Ensure that the installation site allows adequate clearance for both airflow
and maintenance. For details, see the
MX2008 3D Universal Edge Router Hardware
Guide
.
2.
Reattach the front and rear shipping covers to the chassis to help move the router.
The handles on the shipping covers are used to guide the chassis during installation.
CAUTION:
Do not lift the router by using the handles on the shipping
covers. Use these handles only to help position the router.
3.
Place the pallet jack attachment across both legs and secure the attachment to the
pallet jack.
4.
Using a four-person team, load the router onto the pallet jack, making sure it rests
securely on the pallet jack attachment platform (see
).
WARNING:
Applying force to any other parts of the chassis other than the
shipping covers can damage the chassis.
21
Copyright © 2017, Juniper Networks, Inc.
Use the Pallet Jack with Attachment to Install the Router
