Juniper MX10016, Hardware Manual

Page: 111 / 320

Table 44: Power Specifications for the JNP10K-PWR-DC2 Power Supply
Specifications Item
•
Minimum operating voltage: –40 VDC
•
Nominal operating voltage: –48 VDC
•
Operating voltage range: –40 VDC through –72 VDC
DC input voltage
•
76-A maximum at minimum operating voltage (-40 VDC) with 80-A
dip switch setting and 5500-W output load.
•
64-A maximum at nominal operating voltage (–48 VDC) with 80-A
dip switch setting and 5500-W output load.
•
60-A maximum at minimum operating voltage (-40 VDC) with 60-A
dip switch setting and 4400-W output load.
•
50-A maximum at nominal operating voltage (-48 VDC) with 60-A
dip switch setting and 4400-W output load.
DC input current rating
2200 W for low input (60-A) single feed
4400 W for low input (60-A) dual feed
2750 W for high input (80-A) single feed
5500 W for high input (80-A) dual feed
Output power
Table 45 on page 113 shows the physical specifications for a JNP10K-PWR-DC2 power supply.
Table 45: Physical Specifications of a JNP10K-PWR-DC2 Power Supply
Value Specification
3.5 in. (8.89 cm) Height
3.6 in. (9.14 cm) Width
16.05 in. (40.77 cm) Depth
8.1 lb (3.67 kg) Weight
MX10016 Grounding Cable and Lug Specifications
For installations that require a separate grounding conductor to the chassis, the router must be adequately
grounded before power is connected to ensure proper operation and to meet safety and electromagnetic
113