Juniper LTE Mini-PIM, Installation Manual

Page: 17 / 32

NOTE: If all the LEDs are blinking, it indicates that firmware updates are in progress. Do not
power off the services gateway before the updates complete.
LTE Mini-Physical Interface Module Hardware Specifications
Table 8 on page 7 provides the hardware specifications for the LTE Mini-PIM.
Table 8: LTE Mini-PIM Hardware Specifications
Value Description
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
Dimensions (H x W x L)
0.23 lb (0.106 kg) Weight
SMA Connector type
Mini-PIM Form factor
32° F through 104° F (0° C through 40° C) Environmental operating temperature
-40° F through 158° F (-40° C through 70° C) Storage temperature
5% to 90% noncondensing Relative humidity
7