Juniper JUNOSe 10.2.2, Release Note

Page: 13 / 118

Release Overview
„ 5
Release 10.2.2
Release Overview
These Release Notes cover Release 10.2.2 of the system software for the Juniper
Networks E Series Broadband Services Routers and contain the following sections:
„ Release Highlights on page 7
„ Early Field Trial Features on page 7
„ Unsupported Features on page 9
„ Release Software Protocols on page 10
„ SRC Software and SDX Software Compatibility Matrix on page 12
„ Known Behavior on page 12
„ Known Problems and Limitations on page 34
„ Resolved Known Problems on page 52
„ Errata on page 54
„ Appendix A, System Maximums on page 61
„ Appendix B, Module Name Cross-Reference Information on page 103
„ Appendix C, Transferring DSL Line Rate Information from an Access Node to SRC
Software
on page 105
If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes .
Before You Start
These Release Notes include information about the changes between Releases
10.2.1 and 10.2.2. Before you use your new software, read these Release Notes in
their entirety, especially the section Known Problems and Limitations . You need the
following documentation to fully understand all the features available in Release
10.2.2:
„ These 10.2.2 Release Notes, which describe changes between Release 10.2.2
and Release 10.2.1
„ The 10.2.1 Release notes, which describe the features available in Release
10.2.1
„ The 10.2.x documentation set, which provides detailed information about
features available in Release 10.2.0