Juniper Junos Space JA1500, Hardware Manual

Page: 116 / 210

You must configure the basic settings for your appliance before you can use it to
manage devices. Refer to
“Configuring a Junos Space Appliance as a Junos Space
Node” on page 48 and “Configuring a Junos Space Appliance as a Standalone or
Primary FMPM Node” on page 70 for details.
Related
Documentation
Booting the Junos Space Appliance on page 47
•
•
Changing Network and System Settings for a Junos Space Appliance on page 87
•
Powering Off the Junos Space Appliance on page 102
Powering Off the Junos Space Appliance
There are three ways to power off or power down a Junos Space Appliance:
•
Using the management console
•
Using the appliance power switch
• Using the Junos Space Network Management Platform. Refer to the Shutting Down or
Rebooting Nodes in the Junos Space Fabric topic in the Junos Space Network Management
Platform Workspaces Feature Guide (available at
http://www.juniper.net/techpubs/en_US/release-independent/junos-space/index.html
)
for details.
This topic includes the following sections:
•
Powering Off Using the Management Console on page 102
• Powering Off Using the Appliance Power Switch on page 103
Powering Off Using the Management Console
You can power off the Junos Space Appliance from the Junos Space CLI by using the
management console.
Before you begin, do the following:
• Connect the Junos Space Appliance to a management console. Refer to “Connecting
a Junos Space Appliance to a Management Console” on page 43 for more information.
•
Configure a console terminal or terminal emulation utility to use the following serial
connection parameters:
• Baud rate: 9600 bits per second
• Data: 8 bits
•
Flow control: None
•
Parity: None
• Stop bits: 1
• Ensure that the appliance is booted and the console displays the login prompt.
Copyright © 2018, Juniper Networks, Inc. 102
JA2500 Junos Space Appliance Hardware Guide