Juniper EX4600, Hardware Manual

Page: 230 / 230

Related
Documentation
Chassis Alarm Messages on a QFX3008-I Interconnect Device
•
•
Chassis Alarm Messages on a QFX3500 Device
•
Interface Alarm Messages on page 212
•
show chassis alarms
•
show system alarms
Interface Alarm Messages
Interface alarms are alarms that you configure to alert you when an interface is down.
To configure an interface link-down condition to trigger a red or yellow alarm, or to
configure the link-down condition to be ignored, use the
alarm
statement at the [
edit
chassis
] hierarchy level. You can specify the
ethernet
,
fibre-channel
, or
management-ethernet
interface type.
NOTE: Fibre Channel alarms are only valid on QFX3500 devices.
By default, major alarms are configured for interface link-down conditions on the control
plane and management network interfaces in a QFabric system. The link-down alarms
indicate that connectivity to the control plane network is down. You can configure these
alarms to be ignored using the
alarm
statement at the [
edit chassis
] hierarchy level.
NOTE: If you configure a yellow alarm on the QFX3008-I Interconnect device,
it will be handled as a red alarm.
Related
Documentation
•
Understanding Alarms on page 211
Copyright © 2014, Juniper Networks, Inc. 212
EX4600 Switch Hardware Guide