Juniper EX4600, Hardware Manual

Page: 38 / 230

Figure 9: EX4600-EM-8F Faceplate and LEDs
g050274
1
2
2
2— 1— SFP+ port LEDs Expansion module status LED
When the expansion module is inserted into the expansion bay, the chassis detects the
additional ports, recognizes them as 10GbE ports, and lights the Status LED.
Table 8 on page 20 describes the Status LED on the EX4600-EM-8F.
Table 8: EX4600-EM-8F Status LED
Description State LED
• The expansion module is offline.
•
The chassis is powered off.
Unlit
ST
• The expansion module is online and functioning normally. Green
QFX-EM-4Q
The QFX-EM-4Q, provides 4 additional 40-Gigabit Ethernet QSFP+ ports to one of the
bays in the EX4600 switch. Port 0 and port 2 can be used for port channelization by
configuring the system mode for 104 port mode.
Figure 10 on page 20 shows the QFX-EM-4Q ports and LEDs.
Figure 10: QFX-EM-4Q Faceplate and LEDs
2— 1— QSFP+ port LEDs Expansion module status LED
Copyright © 2014, Juniper Networks, Inc. 20
EX4600 Switch Hardware Guide