Juniper EX4500-40F-BF, Complete Hardware Manual, Page: 61 / 294

Table 18: EX Series Switches Console Port Connector Pinout Information (continued)
Description Signal Pin
Transmit data TxD Output 3
Signal ground Signal Ground 4
Signal ground Signal Ground 5
Receive data RxD Input 6
Data carrier detect CD Input 7
Clear to send CTS Input 8
Related
Documentation
EX2200 Switches Hardware Overview
•
•
Rear Panel of an EX3200 Switch
•
Rear Panel of an EX3300 Switch
•
Rear Panel of an EX4200 Switch
•
EX4300 Switches Hardware Overview
•
Front Panel of an EX4500 Switch on page 12
•
EX4550 Switches Hardware Overview
•
Management Panel of an EX4600 Switch
•
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch
•
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch
•
Routing Engine (RE) Module in an EX8216 Switch
•
Connecting a Switch to a Management Console on page 150
•
Configuring the Console Port Type (CLI Procedure)
RJ-45 to DB-9 Serial Port Adapter Pinout Information for a Switch
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect
to a management device such as a PC or a laptop. If your laptop or PC does not have a
DB-9 male connector pin and you want to connect your laptop or PC to the switch, use
a combination of the RJ-45 to DB-9 female adapter supplied with the switch along with
a USB to DB-9 male adapter.
Table 19 on page 44 provides the pinout information for the RJ-45 to DB-9 serial port
adapter.
43 Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Component Specifications