8
Field PC AMXU GPS Expansion Pod
When you are finished, click the “OK” button in the upper
right hand of the screen to confirm the settings.
Note: the External GPS control panel only support NMEA
messages from the GPS receiver.
For more information consult the Field PC Owner’s
Manual or Windows Mobile help files.
GPS Receiver Hardware Settings
Below are the default settings used to communicate with
the GPS receiver. If you are not using the GPS Manager
and your program needs to communicate directly with
the GPS receiver, you must put this information into your
GPS application.
COM3
38400 Baud
No Parity
8 data Bits
Stop Bit
Note: The GPS receiver uses the DTR signal on COM3 to
control power. If your GPS program has a checkbox or setting
to enable the DTR function, enable it for proper operation of the
GPS Expansion pod.
Juniper Systems LandMark Mobile GPS Utility has a DTR
function option which must be checked.
Summary of Contents for AMXU GPS EXPANSION POD
Page 1: ...AMXU GPS EXPANSION POD...
