background image

6

 

Field PC AMXU GPS Expansion Pod

NMEA Message String Details

 

„

Protocol: NMEA 0183 Version 2.3

 

„

All messages are sent at a fixed 1 second interval

 

„

Default NMEA messages: 

- RMC  Recommended Minimum Data 

- VTG  Course Over Ground and Ground Speed 

- GGA  Global Positioning System Fix Data 

- GSA  GNSS DOP and Active Satellites 

- GSV  GNSS Satellites in View 

- GLL  Latitude and Longitude with Time of Position  

   

Fix and Status

 

„

NMEA messages that can be activated 

- GRS     GNSS Range Residuals   

- GST     GNSS Pseudo Range Error Statistics   

- ZDA    Time And Date   

- GBS     GNSS Satellite Fault Detection   

- DTM   Datum Reference

“GPS Always On” Setting

The “GPS always on” option is not selected by default. 

The GPS powers off when the Field PC suspends and 

powers back on when it resumes. There is typically a 1-5 

second delay getting a good position fix on a warm start, 

but this varies for each situation. 

To help you avoid potential start up delays, select “GPS 

always on.” When selected, the GPS receiver remains 

powered when the Field PC is suspended. The receiver is 

Summary of Contents for AMXU GPS EXPANSION POD













Reviews: