Juniper Allegro CX, User Manual

Page: 88 / 122

AI Allegro CX User’s Guide
82 FAQs
How can I verify interruption or make timing adjustments to ensure the
Allegro is capturing the correct Structure P/S and Structure IRF at the
correct time?
Start AI-DVM to complete the following steps:
1
Tap
Options
>
On/Off
tab >
Enable On/Off mode
.
2
Set up on/off settings and then tap
OK
.
3
Tap
Graph
to view a waveform of on/off readings as shown in the next example.
For more information, see DVM Graph Overview (page 27).
What can I do if I cannot get a GPS satellite fix?
Verify the following settings are correct:
• Run the GPS Status software and verify COM port settings are correct.
•
Run the GPS Pod Setup software and verify settings are correct. All software must
be closed before viewing settings in GPS Pod Setup.
• Verify the GPS antenna has a clear view of the sky and is securely connected to the
Allegro.
Why are GPS coordinates not recording in my Periodic Survey file?
Verify the cursor is in a reading field in the bottom pane of the survey file. Tapping a
reading field places the cursor in the field.
Why is the Insert GPS command unavailable for selection in the Periodic
Survey software?
Verify the GPS Status software is running and the cursor is in a reading field in the bottom
pane of the survey file. Tapping a reading field places the cursor in the field.