JUNIOR JONES J-DUO, Instruction Manual

Page: 7 / 15

J-DUO Instruction Manual
J-DUO Instruction Manual
22 23
7. Folding the J-DUO chassis
IMPORTANT: remove the seat unit / carrycot / car seat and any adaptors
before attempting to fold the chassis and ensure the shopping basket
is empty.
The chassis will not fold unless the handle is in the lowest position and
seats, carrycots adaptors etc. have been removed from the chassis.
Engage the parking brake.
Ensure the handle is in its lowest position. Ensure the front wheels are
unlocked and in the swivel position.
Fully rotate the central section of the handlebar towards you, the hub
locks will release (fig. 9). Lower the handle towards the floor (fig. 10).
Lift the carry handle, which is in the centre of the basket, and lift the
chassis upwards to allow the front of the chassis to move towards the
rear of the chassis (fig. 11).
Secure the chassis using the locking hooks (fig. 12).
8. Fitting the seat unit to the J-DUO chassis
IMPORTANT: ensure that both the legs are in the same position before
attempting to attach the seat unit to the chassis (fig. 13). Failure to do
so may cause damage to the seat unit.
Insert the seat unit legs into the main housings on the chassis until the
seat locks in place with a click (fig. 14).
WARNING:
ensure the seat unit is locked in place
on the chassis before use.
The seat unit can be used in forward-facing or parent-facing modes.
Simply attach the seat unit in the same way in your preferred facing mode.
9. Attaching and removing the bumper bar
Slot the bumper bar into the sockets on the seat unit whilst holding
down the release button (fig. 15).
IMPORTANT: ensure the bumper bar is locked in place before use by
pulling the bumper bar upwards.
To remove the bumper bar press the small buttons on the seat unit
under the bumper bar and pull the bumper bar away from the seat unit
(fig. 16).
The bumper bar can be released one side at a time to allow easy
access for placing your child in or removing your child from the seat
unit (fig. 17).
10. Adjusting the seat unit
Lift the adjustment handle on the top side of the seat unit and adjust
the seat to the desired position (fig. 18). The seat unit will lock into
position when the handle is released. The seat unit has 3 positions.