5.1 Current Time Setting
Step 1) Press the hour digit of display screen will be flashing.
Use " " or " " keys to adjust hour(s).
Step 2) After setting current hour(s), press again and the minute digit of
display screen will be flashing. Use " " or " " keys to adjust current
minute(s). Your current time setting will be automatically saved and
displayed on the screen after 10 seconds without operating. Or you can
press to go back to the Automatic Running Mode with your updated
current time.
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
Coordinate with other function keys to adjust your settings.
12
Press to set the time duration of
Daytime Mode
.
Press once for setting
hour(s), twice for setting minute(s). Use / to adjust the time.
5
Press to recover the default only when the temperature is displayed.
8
RESET
Press to save your settings whenever you want.
SAVE
9
10
COLOR
Press to choose 24-hour clock or 12-hour clock key. Factory setting is 24-
hour clock.
11
24/12
Press to choose Celsius or Fahrenheit display of the light fixture.
C
/
F
Press to demonstrate one-day lighting effects in a few minutes. Press any
key to quit this mode.
DEMO
Press to set the current time. Press once for setting hour(s), twice for
setting minute(s). Use / to adjust the time as you want.
Press to set the time duration of
Nighttime Mode
. Press once for
setting hour(s), twice for setting minute
(s)
. Use / to adjust the time.
7
Press to set the time duration of
Sunset Mode
.
Press once for setting
hour(s), twice for setting minute(s). Use / to adjust the time.
6
Press to toggle between white, blue, or color mixing, and adjust the
brightness of each one by / . This allows you to combine a variety of
different settings to simulate the daytime effect.
Press to toggle between white, blue, color mixing and adjust the
brightness of each one by / . This allows you to combine a variety of
different settings to simulate the nighttime effect.
Press to toggle between white, blue, or color mixing, and adjust the
brightness of each one by / . This allows you to combine a variety of
different settings to simulate the sunset effect.
Press to simulate the lightning effect and use / to adjust its frequency.
Press to simulate the
cloudy
effect and use / to adjust its frequency.
Operating Instructions
(
Note:
You can set the time duration for each mode as you like. If the total is less than
24 hours, the light will be OFF after the Nighttime mode until the next cycle. If the
total is more than 24 hours, the time period over 24 hours will be ignored)
T
u
rn
in
g o
ff
Light on time
The time duration of dawn mode
Dawn lighting effects
The time duration of sunrise mode
Sunrise lighting effects
The time duration of daytime mode
Daytime lighting effects
The time duration of sunset mode
Sunset lighting effects
The time duration of nighttime mode
Nighttime lighting effects
Timer settings
Lighting effects settings
5
(
Tip: Press to choose 24-hour clock or 12-hour clock.)
5.1 Current Time Setting
Step 1) Press the hour digit of display screen will be flashing.
Use " " or " " keys to adjust hour(s).
Step 2) After setting current hour(s), press again and the minute digit of
display screen will be flashing. Use " " or " " keys to adjust current
minute(s). Your current time setting will be automatically saved and
displayed on the screen after 10 seconds without operating. Or you can
press to go back to the Automatic Running Mode with your updated
current time.
Before using the timer, the current time must be set.
-
+
-
+
12
11
