Jungheinrich WMT 210 Service Manual Download Page 9 | Manualshive

Page: 9 / 35

Jungheinrich WMT 210 Service Manual Download Page 9

Seite 9

v1.0

30.05.2022

[email protected]

Public

4.

Mounting and Handling

WMT 210

WMT 215

4.1

VESA75 Interface

VESA75 hole pattern according to illustration, position 4.

-

Horizontal and vertical distance between the screw holes: 75 mm

-

Thread: M6, torque: 8 Nm (recommended)

-

Screw-in depth in the threaded bushings: max. 6 mm

4.2

U-Mount Interface

Mount the retaining bracket (see illustration, position 6) on the device using the screws supplied in the
following order from the inside to the outside:
Nord-Lock washer -> bracket -> Nord-Lock washer -> Allen screw (SW 6 mm) -> cover cap.

4.3

Opening the service slot

NOTE

The relevant safety measures must be observed at all times when handling electrostatically haz-

ardous components. (DIN EN61340-5-1 / DIN EN 61340-5-2).

Remove the 6 screws of the service slot cover (see illustration, position 5) with a Torx Tx10 screw-
driver.
Remove the service slot cover from the device.

«
...
7
8
9
10
11
...
»

Summary of Contents for WMT 210




































Reviews:

No comments