Jungheinrich ESD 220, Operating Instructions Manual

Page: 124 / 186

2 Operational Safety and Environmental Protection
The inspections and maintenance tasks listed in chapter "Maintenance, Inspection
and Changing of Maintenance Parts Requiring Replacement" must be performed
according to the defined service intervals (see page 145).
The manufacturer recommends the replacement of the maintenance parts also listed
in chapter "Maintenance, Inspection and Changing of Maintenance Parts Requiring
Replacement" according to the specified replacement intervals (see page 145).
WARNING!
Risk of accidents and component damage
Any modification to the truck, in particular the safety mechanisms, is prohibited.
NOTICE
Only original spare parts are subject to the manufacturer's quality control. To ensure
safe and reliable operation, use only the manufacturer's spare parts.
Exception: Operating companies should only make changes or have changes made
to powered industrial trucks if the manufacturer is no longer operating in the field and
there is no successor to the business; operating companies must however:
– Ensure that the changes to be made are planned, tested and performed by a
specialist engineer in industrial trucks taking safety into account.
– Keep permanent records of the construction, tests and completion of changes
– Carry out and have authorised the respective changes to the capacity data plates,
decals and stickers as well as the operating instructions and workshop manuals
– Attach a permanent and clearly visible marking to the truck indicating the types of
changes made, the date of the changes and the name and address of the
organisation responsible for the work.
Z
On completion of inspection and service work, carry out the operations listed in the
“Recommissioning the truck after cleaning or maintenance work” section (see
page 140).
122
10.19 en-GB