Jungheinrich EJE 116, Operating Instructions Manual

Page: 29 / 81

0606
.GB
D 8
7 Battery discharge indicator (
t
)
The battery discharge state is indicated as soon as
the truck is switched on with the key switch or the
CANCODE.
The colors of the LED (8) indicate the following:
Z
Lifting of load units is no longer possible if the LED is lit in red. The lifting function is
re-enabled at a battery capacity of at least 70 % only.
The display is reset to 100% if the battery capacity determined when the truck is
switched on is at least 70% of a fully charged battery. Depending on the residual ca-
pacity, the display is reduced in steps of 10%. The displayed residual capacity chang-
es by no more than 10% within 3 minutes.
The residual capacity displayed cannot rise while the truck is in operation.
The residual capacity display is reset to 100% when the battery type is defined.
Call the manufacturer service when LED flashes red and the truck cannot be operat-
ed any longer. The LED flashing red signals a truck controller malfunction. The flash
sequence indicates the malfunction type.
LED color Rating
green Residual capacity, standard battery 40 - 100%
Residual capacity, maintenance-free battery 60 - 100%
orange Residual capacity, standard battery 30 - 40%
Residual capacity, maintenance-free battery 50 - 60%
green/orange
flashing, 1Hz
Residual capacity, standard battery 20 - 30%
Residual capacity, maintenance-free battery 40 - 50%
red Residual capacity, standard battery 0 - 20%
Residual capacity, maintenance-free battery 0 - 40%
9
0606
.GB
D 8
7 Battery discharge indicator (
t
)
The battery discharge state is indicated as soon as
the truck is switched on with the key switch or the
CANCODE.
The colors of the LED (8) indicate the following:
Z
Lifting of load units is no longer possible if the LED is lit in red. The lifting function is
re-enabled at a battery capacity of at least 70 % only.
The display is reset to 100% if the battery capacity determined when the truck is
switched on is at least 70% of a fully charged battery. Depending on the residual ca-
pacity, the display is reduced in steps of 10%. The displayed residual capacity chang-
es by no more than 10% within 3 minutes.
The residual capacity displayed cannot rise while the truck is in operation.
The residual capacity display is reset to 100% when the battery type is defined.
Call the manufacturer service when LED flashes red and the truck cannot be operat-
ed any longer. The LED flashing red signals a truck controller malfunction. The flash
sequence indicates the malfunction type.
LED color Rating
green Residual capacity, standard battery 40 - 100%
Residual capacity, maintenance-free battery 60 - 100%
orange Residual capacity, standard battery 30 - 40%
Residual capacity, maintenance-free battery 50 - 60%
green/orange
flashing, 1Hz
Residual capacity, standard battery 20 - 30%
Residual capacity, maintenance-free battery 40 - 50%
red Residual capacity, standard battery 0 - 20%
Residual capacity, maintenance-free battery 0 - 40%
9