Jungheinrich EJE 116, Operating Instructions Manual

Page: 38 / 81

E 9
0606
.GB
4.3 Picking up and setting down loads
m
Before a load can be picked up, the driver must make sure that it is properly paletted
and does not exceed the permitted load capacity of the truck.
Loading long goods transversely is not permitted.
– Drive the truck’s fork tines completely under the load.
Z
The lifting and lowering speeds are preset.
Lifting
– Press the “Lift load lifting device” pushbutton (10) (for left-handed operation
o
(13))
until the desired height is reached.
m
Release the button immediately when the end stop of the load lifting device is
reached.
Lowering
– Press the “Lower load lifting device” pushbutton (11) (for left-handed operation
o
(14)).
4.4 Rendering the vehicle safe when parking
F
Always render the truck safe when parking it.
Do not park the truck on an incline.
The load lifting device must always be entirely lowered.
– Lower the load lifting device.
– Set key switch (5) to position “0” and remove the key or press CANCODE “Off”.
1
2 3
4
5
6
7
8
0
9
Set
11
10
13
14
5
E 9
0606
.GB
4.3 Picking up and setting down loads
m
Before a load can be picked up, the driver must make sure that it is properly paletted
and does not exceed the permitted load capacity of the truck.
Loading long goods transversely is not permitted.
– Drive the truck’s fork tines completely under the load.
Z
The lifting and lowering speeds are preset.
Lifting
– Press the “Lift load lifting device” pushbutton (10) (for left-handed operation
o
(13))
until the desired height is reached.
m
Release the button immediately when the end stop of the load lifting device is
reached.
Lowering
– Press the “Lower load lifting device” pushbutton (11) (for left-handed operation
o
(14)).
4.4 Rendering the vehicle safe when parking
F
Always render the truck safe when parking it.
Do not park the truck on an incline.
The load lifting device must always be entirely lowered.
– Lower the load lifting device.
– Set key switch (5) to position “0” and remove the key or press CANCODE “Off”.
1
2 3
4
5
6
7
8
0
9
Set
11
10
13
14
5