Jungheinrich AMW 22, Operating Instructions Manual

Page: 84 / 112

4.9.3.6 Summing individual weights and deleting the totals memory
Example
– Weight of load no. 1: 250 kg
– Weight of load no. 2: 1250 kg
Summing individual weights Key Display (example)
– Pick up and raise the pallet.
– Activate tare – see page 81 or
see page 82.
– Deposit load no. 1 on the pallet.
Z
The weight of load no. 1 is
shown on the display.
NET
ID CODE PT TOTAL KG/LB
CLR
e1 e2 e3 STP1 STP2
kg
– To add the weight to the total
weight, press the "+" key.
Z
The display switches back
and forth between the number
of weighing operations and
the weight of the load 3 times.
The display then
automatically reverts to
weighing mode.
Z
If a printer is connected, a
printout is created with the
gross, tare and net weights.
TOTAL
NET
ID CODE PT TOTAL KG/LB
CLR
e1 e2 e3 STP1 STP2
NET
ID CODE PT TOTAL KG/LB
CLR
e1 e2 e3 STP1 STP2
kg
– Remove load no. 1 from the
pallet.
– Deposit load no. 2 on the pallet.
Z
The weight of load no. 2 is
shown on the display. NET
ID CODE PT TOTAL KG/LB
CLR
e1 e2 e3 STP1 STP2
kg
– To add the measured weight to
the total weight, press the "+" key.
Z
The display switches back
and forth between the number
of weighing operations and
the total weight 3 times.
The display then
automatically reverts to
weighing mode.
Z
If a printer is connected, a
printout is created with the
gross, tare and net weights.
TOTAL
NET
ID CODE PT TOTAL KG/LB
CLR
e1 e2 e3 STP1 STP2
NET
ID CODE PT TOTAL KG/LB
CLR
e1 e2 e3 STP1 STP2
kg
84
11.19 en-GB