Presence detector
–
Adjuster for manual adjustment of sensitivity
–
Status LED: Flashes during motion detection; depending on programming in normal oper-
ation or only during the walking test mode
Additional characteristics of "Universal" version:
–
Manual operation with IR remote control possible (accessories)
–
5 function blocks for motion or presence detection each with 2 outputs
–
Function blocks switchable, e.g. for day/night operation
–
PIR sensors can be evaluated separately
–
Brightness sensor function with 3 limiting values
–
Light control with max. of 3 channels, setpoint shift in operation, separate configuration of
dimming-up, control and dimming-down phase
–
Light control can be combined with presence detector function
Presence detector function:
–
Detection of the smallest motions e.g. at a workplace for detecting the presence of per-
sons
–
Switch on: Motion detection and brightness threshold not reached
–
Switch off: No motion in the detection field and run-on-time elapsed or brightness
threshold exceeded
Motion detector function:
–
Detection of motions for passageway security in buildings
–
Switch on: Motion detection and brightness threshold not reached
–
Switch off: No motion in the detection field and run-on-time elapsed
After reacting and switching on, the motion detection works independently of the bright-
ness.
Alert operation:
–
Brightness-independent detection of motions in the detection field
–
Switch on: After detection of an adjustable number of motions within the set monitoring
period
–
Switch off: No persons in the detection field and run-on-time elapsed
5
Operation
Only for "Universal" version:
Obey the battery safety instructions.
￭
Keep contacts of batteries and device free of grease.
￭
Insert the supplied battery with correct polarity (see IR remote control imprint)
Function buttons IR remote control
Button
Function
¿
Detection of a motion is sent for function block
1. The automatic mode is exited.
Á
End of a motion is sent for function block 1.
The automatic mode is exited.
À
The automatic mode is activated again for
function block 1.
The ON state is first exited after a new motion
detection.
3 / 11
82585623
23.07.2019
j0082585623
