Intended use
-
Operating loads, e.g. light switching and dimming, controlling blinds/shutters, etc.
-
Visualising switching states
-
Concealed mounting in double appliance box - without centre bar - to DIN 49073
Product characteristics
-
Push-button functions: switching, scanning, dimming, Venetian blind, value transmitter,
calling up modes, etc.
-
High-quality glass surface with 24 buttons
-
Operation through touching the sensor buttons
-
Labelling with push-in labels
-
Status indication with 24 LEDs; the colours red, green and blue can be configured
-
Acoustic signal display, e.g. for button press
-
Fault message on dismantling
-
Logic and time functions
-
Integrated bus coupling unit
-
Supply via separate power supply (accessory) or the auxiliary voltage output of the KNX
power supply
4 Operation
Operating a function or load
Each sensor area has a function assigned to it. Operation is carried out by pressing the sensor
areas and depends on the specific function.
o
Switch: Short press on sensor area.
o
Dim: Long press on the sensor area. The dimming process ends when the sensor area is
released.
o
Move Venetian blind: Long press on sensor area.
o
Stop or adjust Venetian blind: Short press on sensor area.
o
Call up light scene: Short press on sensor area.
o
Save light scene: Long press on sensor area.
o
Set value, e.g. brightness or temperature setpoint: Short press on sensor area.
Cleaning the surface
o
Clean the glass surface with a soft cloth. If needed, moisten the cleaning cloth.
i
Do not use sharp objects for cleaning.
i
Do not use sharp cleaning agents, acids or organic solvents.
i
Keep moisture from penetrating into the device.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
2/7
82575503
J:0082575503
07.12.2010
Signal panel
