KNX
4-channel analog input module
Ref.-no.: 2214 REG AM
Connection to a KNX/EIB analog input:
The parameters to be set for connected sensors must be determined
beforehand.
Type
Use
Order no.
Brightness
outdoor
WS 10H
Twilight
outdoor
WS 10D
Temperature
outdoor
WS 10T
Wind
outdoor
WS 10W
Rain
outdoor
WS 10R
9. Technical
Data
Power supply
Supply voltage :
AC 24 V ± 10 %
Current consumption :
170 mA max.
Current consumption
on system connector :
typically 150 mW
Ambient temperature :
-5 °C ... +45 °C
Storage/transport temp. :
-25 °C ... +70 °C
Humidity
Ambient/storage/transport :
93 % r.h. max., no
condensation
Protective system :
IP 20 as per EN 60529
Installation width :
4 modules / 72 mm
Weight :
approx. 150 g
Connections
Inputs, power supply :
screw terminals
single-wire :
0.5 mm²
to 4 mm²
stranded wire (without ferrule) :
0.34 mm²
to 4 mm²
stranded wire (with ferrule) :
0.14 mm²
to 2.5 mm²
Connection to KNX/EIB device : 6-pole system connector
Sensor inputs
Number :
4x analog
Evaluable sensor signals :
0 … 1 V DC, 0 … 10 V DC,
0 … 20 mA, 4 … 20 mA
Voltage measurement impedance :
approx. 18 k
Ω
Current measurement impedance :
approx. 100
Ω
External sensor power supply (+U
s
) :
24 V DC, 100 mA max.
Subject to technical modifications.
4
