4.3 Radio Management transmitter controls eNet actuators
Connect the Radio Management transmitter and eNet actuators
Figure 5: Connecting the Radio Management transmitter
o
Press the
Prog
button (3) of the gateway for approx. 4 seconds.
The LED (2) of the gateway flashes slowly. The device is in programming mode for
approx. 1 minute.
o
Switch all the eNet actuators, which are to react to the channel or scene button, to
programming mode as well (see actuator instructions).
i
Up to 10 eNet actuators can be connected at the same time.
o
Press the channel button on the Radio Management transmitter for longer than one second
or the scene button for longer than three seconds.
The LED of the gateway switches to continuous on for a few seconds.
The radio transmitter is connected. The gateway and actuators exit the programming mode
automatically.
5/8
82582113
J:0082582113
13.03.2014
eNet
Radio converter in SCHUKO housing
