o
Insert device into a SCHUKO socket.
4.1 Commissioning
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
During commissioning, cover the parts carrying voltage on radio transmitters
and actuators and in their surrounding area.
4.2 eNet transmitter controls Radio Management actuators
i
Commissioning is not possible via the eNet server.
Connecting the eNet transmitter with the Radio Management actuator
Figure 3: Connecting the eNet transmitter
Connection takes place in two steps (figure 3). First an eNet transmitter is connected to the
gateway (A), and, in the second step, the eNet transmitter connected to one or more Radio
Management actuators (B).
First step (A):
o
Press the
Prog
button (3) of the gateway for approx. 4 seconds.
The status LED (2) of the gateway flashes slowly. The device is in programming mode for
approx. 1 minute.
o
Switch the eNet transmitter to programming mode as well (see eNet transmitter
instructions).
o
Briefly press the channel or scene button of the transmitter.
The LED of the gateway lights up for approx. 5 seconds.
The gateway and transmitter exit the programming mode automatically.
Second step (B):
o
Switch one or more Radio Management actuators to programming mode (see Radio
Management actuator instructions).
o
Press the channel button of the eNet transmitter for longer than one second or the scene
button for longer than three seconds.
The LEDs of the Radio Management actuators light up.
The eNet transmitter is connected to the Radio Management actuators.
3/8
82582113
J:0082582113
13.03.2014
eNet
Radio converter in SCHUKO housing
