Connecting sensors to terminal block
Figure 5: Connection to the terminal block
o
Connect the sun sensor with the correct polarity (figure 5) according to the connection
diagram. The "earth" is identified for the sensor cable and the "sun" is identified for the
extension cable (accessory).
i
Interchanging the connections will result in malfunctions.
Plugging the sensor cable into the cover
It is only possible to connect the sun sensor to the cover if a corresponding socket is present.
This is not the case for all covers with sensor evaluation.
o
Insert plug of sun sensor into the socket of the cover.
Fasten sun sensor to the window
The positioning of the sun sensor on the window determines the stop position of the Venetian
blind when the sun protection is active. The Venetian blind comes to a stop slightly above the
sun sensor.
o
Fasten sun sensor to the window (observe the instructions for the sun sensor).
5/7
32524333
J0082524333
13.09.2016
Blinds Management
Centre plate with radio receiver, Centre plate with radio receiver and
sensor connection
