Routing the sensor cable in-wall
Figure 3: In-wall routing of the sensor cable
i
For in-wall routing of the sensor cable, use only shielded cables. Recommendation: J-
Y(ST)Y 2x2x0.6 mm.
o
Insert the cable through the hole (4) in the insert and route it through the cable duct (5) to
the terminal block (6) (figure 3).
i
The terminal block is included with the covers with sensor connection.
o
Connect the cable (see "Connecting sensors to terminal block")
Routing the sensor cable with surface-mounting
Figure 4: Surface-mounted routing of the sensor cable
o
For surface-mounted routing of the sun sensor (8), cut off the plug.
o
Route the sensor cable behind the supporting plate (7) and through the cable duct to the
connecting terminal (6) (figure 4).
o
Connect the cable (see "Connecting sensors to terminal block")
4/7
32524333
J0082524333
13.09.2016
Blinds Management
Centre plate with radio receiver, Centre plate with radio receiver and
sensor connection
