Art. No. ..5192KRMTSD
Art. No. ..5194KRMTSD
can function as an operation display or as a status display. Furthermore, different statuses of
the internal controller can be displayed. As an alternative, with the aid of separate
communication objects, they can signal widely varying display information completely
independently of the pushbutton function, e.g. operation states of fault messages or also room
temperature controllers, the results of logic value comparisons, flash or be permanently
switched on or off. Each colour of a status LED can be controlled either by three separate
objects or alternatively by a mutual object (superimposed function), so that traffic light functions
can also be implemented, - for example, depending on a limiting value - by means of an LED.
Moreover, the device has functions which are not linked directly with the rockers or buttons.
These include the thermostat extension function, pushbutton function disable, the internal
scenes and the display of alarm signals.
2.5.1 Operating level
Up to 17 pieces of display information (actual temperature, setpoint temperature, outdoor
temperature, any temperature) can be optionally displayed on the LC display in the basic
display of the device with the room temperature controller icons. The information is shown
separately on the display. It is possible to change over between the information automatically
after set times or in a controlled manner by pressing a button on the device (see chapter
4.2.4.2.2. Display control). These properties, and the actually visible display information, are
configured in the ETS before the device is commissioned (see chapter 4.2.4.2.1. Displayed
information).
i
The temperatures can be displayed in
°C
or alternately in
°F
. The display format can be
configured in common for all temperature values in the ETS.
Page 22 of 309
Installation, electrical connection and operation
