KNX
Touch sensor module with integrated coupler
‘Standard / Universal’
Ref.-no.: 30xx TSM....
Fitting of the key covers
Install the covers one by one on the touch sensor module. Position of the
covers see FIG.
A
/
B
. When the cover is correctly aligned (observe TOP
mark on the inside), snap it onto the sensor with a brief press.
Inscription labels (Fig. F)
The covers with article nos. FD..90x TSA NA.. can be labelled. For
labelling, commercial-grade foils can be printed with the JUNG inscription
software and inserted into the keys. Fit as shown in FIG.
F
.
5
