Figure 9: Display „
- -
“ – deletion of a radio transmitter
Deleting all radio transmitters of a radio channel
Connection compartment is opened.
o
Connect 9 V block battery to connection clip (8).
The channel display (13) lights up (figure 4).
o
Press both buttons
n
and
o
(12) for approx. 10 seconds.
The two decimal points light up additionally in the display (figure 8). Deletion mode is
active.
o
Use the
n
/
o
buttons (12) to select the desired radio channel in accordance with the
planned and programmed configuration.
The display (13) shows the radio channel that will be deleted.
o
Press
Enter
button (9) for approx. 3 seconds.
CE
(figure 10) appears on the display.
All radio transmitters for this radio channel have been deleted.
Figure 10: Indication
CE
– „Clear Entry“
Deleting all radio transmitters of all radio channels
Connection compartment is opened.
o
Connect 9 V block battery to connection clip (8).
The channel display (13) lights up (figure 4).
o
Press both buttons
n
and
o
(12) for approx. 10 seconds.
The two decimal points light up additionally in the display (figure 8). Deletion mode is
active.
o
Press
Enter
button (9) for approx. 15 seconds.
AC
(figure 11) appears on the display. All saved radio transmitters of all created radio
channels will be deleted.
When the deletion operation is complete,
00
appears on the display.
The device is in normal operating mode.
8/10
32532823
J0082532823
28.10.2016
Radio Management
Radio-KNX converter
