(10) Programming LED
(11) Programming button
(12)
n
/
o
buttons for selecting the radio channel
(13) Channel display
Maintain a distance of at least 0.5 m from metal surfaces and electrical devices, e.g. microwave
ovens, hi-fi and TV systems, electronic ballasts or transformers.
Maintain a distance of at least 1 m between transmitter and receiver in order to prevent
overmodulation of the receiver.
o
Select the mounting place so that the device will still be accessible for maintenance
purposes.
o
Insert screws through the fastening holes (4) and screw devices to surface.
Connecting the device
o
Insert bus cable (6) through one of the bushings (7) and connect to the device via terminal
(5).
i
Lay antenna (3) as far as possible from bus cable and other metallic parts. Do not roll up,
shorten, extend or strip the antenna.
4.2 Commissioning
i
Assignment, transfer and deletion of radio transmitters requires a 9 V block battery.
Planning the configuration
For initial commissioning, especially with a view to later expandability, it is advisable to plan and
document the configuration in stages.
o
Record the desired state based on the following questions.
Question:
Example:
Where will operation be performed?
living room, office, hallway, entryway
What will be operated?
ceiling lamp, wall lamp, Venetian blind, roller
shutter, exterior light, scene, All On/Off
How will operation be performed?
switching, switching and dimming, short/long
operation of Venetian blind,
What will be used for operation?
hand transmitter rocker switch No. 3 right/left,
motion detector, wall transmitter rocker switch
No. 1 top/bottom, universal transmitter, scene
button
i
A radio transmitter can only be saved once.
i
A radio channel can be operated from several radio transmitters.
i
A radio transmitter can operate several more than one KNX device by linking them in the
KNX configuration with the same group address.
At the end of planning it must be known which channel will be operated via which radio
transmitter. Example:
Channel no. / application
Device
Radio transmitter
1 /
Switching, dimming
Living room ceiling lamp
Hand transmitter,
rocker switch A / 1
2 /
Switching on, switching off
Ceiling fan
Hand transmitter,
rocker switch C / 2
3 /
2 x switching
Switching 1: floor lamp
Switching 2: hallway lamp
Wall transmitter,
rocker switch 2
4/10
32532823
J0082532823
28.10.2016
Radio Management
Radio-KNX converter
