8
1)
The 2 handle legs will be installed in place of the normal legs at the 2 locations shown above. Turn trampoline upside-down, fit leg
socket over stud on trampoline frame, and tighten bolts using a 6mm Allen wrench. Be sure that a hinge is between the side handles.
Do not use rebounder until the handle bar is fully in-
stalled or serious injury or death can occur.
Hinge must be between the handlebar assembly, or
serious injury can occur.
2)
Connect side handles to top handle, and secure with small
thumb screws to create a “top assembly”.
3)
Lower top assembly into handle legs.
You may have to
rotate entire top assembly 180 degrees for holes to line up.
Adjust height as necessary, before securing with large thumb
screws
.
Your exercise handle bar
is now installed!
To remove the handle, follow the installation
instructions in reverse order.
Large thumb screws
SCR-P-11707A
Top handle
HAN-A-20164-02
Right side handle
HAN-P-20169-00
Handle Leg
LEG-A-20324-02
Exercise Handle Bar Installation for Model 550Fi, only
WARNING
Avoid Serious Injury.
Exercise handle bar
(when attached to the
rebounder) is not de-
signed to support your
entire weight. It is to aid
with balance and pro-
vide exercise versatility.
WARNING
WARNING
Left side handle
HAN-P-20170-00
Small thumb screws
SCR-P-11706A
