STEP 1 :
ASSEMBLING THE FRAME
You will need the following parts to complete
section 1:
4 x Top Tubes with T-connector A
- Part A
4 x Top Tubes with T-connector B
- Part B
4 x Centre legs
- Part C
8 x Leg extensions
- Part D
First we will complete one of the four sections of
the trampoline frame.
Slot the narrow end of the top tube with
T-connector A into T-connector B.
Insert the leg extensions into upright tube on
T-connector A.
Note:
You may need to tap the leg extension in
using a rubber mallet or by placing a piece of
wood over the top of the tube. Do not use a metal
hammer on the metal tube as this may distort the
end of tube.
Slot the centre leg onto the top of the leg
A
B
Top tube
Top tube
Centre leg
Leg extension
A
B
7
16 x Self tapping screws and washers
- Part K
You will also need a cross-head screwdriver
(not
supplied)
.
Self tapping screw and washer
Cross-head screwdriver
Screw one of the self tapping screws through the
slot in the T-connector and into the hole in
the leg extension using the cross-head
screwdrive
Screw one of the self tapping screws through the
slot in the Leg extension and into the hole in
the Centre leg using the cross-head screwdriver.
r.
