3. Lay the Bed (5) on the ground inside of the
assembled frame. Make sure that the two warn-
ing decals (not shown) are on top of the Bed.
Note: There are V-rings around the edge of the
Bed (5) and holes around the top of the frame.
During this step, you will attach the Bed to the
frame using the included Springs for holes
on top of frame and for holes on bottom of frame
(see the inset drawing). Hook a spring to the
Bed(5) and using the spring pulling tool(9), pull
the spring from the Bed to the hole slot in the
trampoline frame with even spring tension.
To attach each Spring, you will first hook one end
of the Spring into a V-ring with color webbing
location (see the inset drawing).
Hook the first two Spring (8) into two the V-rings
(with color webbing) on the Bed (5) and into the
holes on the Enclosure Socket. Attach two more
Springs (8) with color webbing location directly
across the Bed (with the webbing) from the first two
Spring. Attach two more Spring (8)with yellow
webbing location halfway between the first/second
Spring (8), so eight Springs (8) are attached as
shown. Attach four more Springs (7) (not shown)
halfway between the first eight Springs(8).
Continue attaching Springs (7)halfway between
the previously attached Springs,until all the Springs
are attached.
V-rings
Holes
Frame
3
Frame
V-ring
Spring (7):
16
During the installation of springs, wear
gloves and protective eye wear
5
7
7
Spring(8):
(
Yellow Color
)
9
Hook the V-ring
Hook the V-ring
5
8(two pcs)
8(two pcs)
8(two pcs)
8(two pcs)
Color Webbing
Black Webbing
Summary of Contents for Ultra JumpPOD
Page 2: ...2...
