background image

JUMPING INSTRUCTIONS

Fundamental Bounce
1.

  Start from a standing position with 

your head erect and your eyes on the 

frame pad.

2.

  Swing your arms forward and up in a 

circular motion.

3.

  Bring your feet together and point 

your toes downward while in the air.

4.

  Keep your feet about 30 cm 

(15 in.)

 

apart from when landing on the bed.

Seat Drop
1.

  Land in a sitting position with your 

legs parallel to the bed.

2.

  Place your hands on the bed beside 

your hips.

3.

  Push with your hands to return to an 

erect position.

Hand and Knee Drop
1.

  Start bouncing from a standing 

position, keeping your eyes on the 

frame pad.

2.

  Land on the bed on your hands and 

knees.

3.

  Push with your hands and come back 

up to an erect position.

Half Turntable
1.

  Start from the front drop position 

and push to the left or right with 

your arms to begin turning your body 

in the opposite direction.

2.

  Turn your head and shoulders 

toward the direction that your body 

is turning.

3.

  Keep your back parallel to the bed 

and your head up.

4.

  After completing a half turn, land in 

the front drop position.

Knee Drop
1.

  Start bouncing from a standing 

position, keeping your eyes on the 

frame pad.

2.

  Land on your knees, keeping your 

back straight and your body erect.

3.

  Come back up to an erect position.

Swivel Hips
1.

  Start with a seat drop.

2.

  Turn your head to the left or right 

and swing your arms up in the same 

direction.

3.

  Turn your hips in the same direction 

as your head and arms, completing a 

twist.

4.

  Land in the seat drop position.

3

IMPORTANT PRECAUTIONS

surface.

1 user

 allowed at any one time.

This can result in serious injury to head, neck, arms or legs.

Summary of Contents for JKR1014G16




















Reviews: