Jumpking JK157P3UBHC2, User Manual

Page: 21 / 32

21
Attach the other two colored webbing V-Rings to
the frame using the same method as shown in the
previous two steps.
Attach four more springs to the V-Rings in the
middle of the four attached points and then attach
them to the frame.
The stitched bed should now be as shown in the
diagram.
Continue to attach springs in the same sequence
as above: in the middle of each section, making
sure the next spring is attached on the opposite
side to even out the tension.
Important: The stitched bed is designed like
elastic to be bouncy, which means that during
note that it will stretch to the correct size when
attaching the springs, this may take some force.
completed step 3.
Attach a spring to the opposite colored webbing
V-Ring.
Important: You will now need to use the spring
tool part G to attach the spring to the frame.
Hook the spring tool onto end of spring, and pull
until the spring can be slotted into the spring slot
on the top of the frame.
IMPORTANT: Ensure the spring is fully
inserted into the slot on the top of the frame
.
Top Spring Hole
Bottom Spring Hole