Jumpking JK157P3UBHC2, User Manual

Page: 19 / 32

STEP 2 : ASSEMBLING THE FRAME
This step will require 2 people who must be
wearing gloves.
Slot two of the frame section together as shown in
the diagram.
While one person holds the assembled sections
upright, the other person can slot a third section
onto the end of the assembled sections.
You will now need to slot the frame together,
this
will take some force . The easiest method is if the
two people face each other.
Hold the top tubes either side of the T-connectors
and push towards each other until the loose end of
the frame can be inserted into the T-connector.
Important: Ensure all of the top tubes, leg
extensions and center legs are fully inserted.
The frame is now fully assembled and you have
now completed step 2.
19
Top view of frame
= Top spring hole
= Bottom spring hole