Jumpking JK1015RC, User Manual

Page: 20 / 30

STEP 3 : FITTING THE STITCHED BED
This step will require 2 people who must be
wearing gloves and protective eye wear.
Lay the stitched bed (
with the V-Rings
) out inside
the frame of the trampoline with the warning labels
facing upwards.
Locate the 4 V-Rings with the colored webbing.
These will be at 4 corners.
Slot one of the 7” springs onto one of the colored
webbing V-Rings as shown.
Important: springs must be slotted on the right way
around.
Slot the other end of the spring into one of the
spring slots in the top of the frame.
IMPORTANT: Ensure the spring is fully
inserted into the slot on the top of the frame .
Colored
webbing
K
J