9
DISASSEMBLY
To disassemble the trampoline enclosure, follow assembly steps 1 through 8 in reverse order.
7. When the last Cord (13) reaches the strap below
the door, thread the Cord over the strap, through
the nearest V-ring, over the strap again, and
through the V-ring again. Do not thread the Cord
through the lower edge of the door. Pull the
Cord tight. Next, thread the Cord over the strap,
through the next V-ring, over the strap again, and
through the next V-ring again. Repeat this proce-
dure until the strap is tied to the V-rings. Tie the
end of the Cord to the last V-ring that it reaches.
Note: The last Cord may overlap the first Cord.
8. Tighten the eight Straps (11) attaching the Netting
(10) to the L-tubes (7) (see step 4). Tie the free
end of each Strap around the rest of the Strap to
prevent the Strap from loosening.
Tighten the straps (not shown) on the underside of
the frame pad.
Using the included plastic tie, attach the Safety
Placard (12) to the Netting (10) near the door as
shown.
The trampoline enclosure is now fully assem-
bled. Make sure that all parts are securely
attached. Familiarize yourself and all users of
the trampoline and the enclosure with the
safety precautions, use and instructional
materials, and care and maintenance instruc-
tions in this manual before using the enclo-
sure.
7
Strap
13
10
V-ring
8
10
12
Frame
Pad
11
7
Door
