STEP 1 :
ASSEMBLING THE FRAME
You will need the following parts to complete
section 1:
10 x Top tube with spring holes - Part A
10 x Top tube without spring holes - Part B
5 x POD-connector - Part C
5 x T-connector - Part D
Complete the top tube sections in circle.
Slot the narrow end of the top tube with spring holes
into the POD-connector.
A
B
T
POD-connector
T-connector
op tube with spring holes
Top tube without spring holes
9
Complete the top tube sections in circle.
Then, slot the narrow end of the top tube without
spring holes into the T-connector.
Y
Important:
ou need to slot the frame together,
this
will take some force
. The easiest method is if the
two people face each other.
Hold the top tubes either side of the
T-connectors or POD-connectors and push
towards each other until the loose end of the
frame can be inserted into the T-connector or
POD-connector.
