Jump Power JP02-R01-120 User Manual Download Page 29

 

28 

WARNING 

CARE AND MAINTENANCE 

This trampoline was designed and manufactured with quality materials and craftsmanship. If 
proper care and maintenance is provided, it will provide all jumpers with years of exercise, fun, 
and enjoyment as well as reduce the risk of injury. Please follow the guidelines listed below: 
 
This trampoline is designed to withhold a certain amount of weight and use. Please make sure 
that only one person at any one time uses the trampoline. Jumpers should either wear socks, 
gymnastics shoes, or be barefoot when using the trampoline. Please be aware that street 
shoes or tennis shoes should NOT be worn while using the trampoline. In order to prevent the 
trampoline mat from getting cut or damaged please do not allow any pets onto the mat. Also, 
jumpers should remove all sharp objects from their person prior to using the trampoline. Any 
type of sharp or pointed objects should be kept off the trampoline mat at all times. 
 
Always inspect the trampoline before each use for worn, abused or missing parts. A number of 
conditions could arise that may increase your chances of getting injured. Please be aware of: 

  Punctures, frays, tears or holes worn in the bed or frame padding 

  Missing, improperly positioned or insecurely attached frame padding  

  Sagging trampoline mat 

  Loose stitching or any kind of deterioration of the mat 

  Bent or broken frame parts (legs and/or rails) 

  Broken, missing or damaged springs 

  Damaged, missing or insecurely attached frame pad 

  Protrusions of any types (especially sharp typed) on the frame, springs or mat or 

suspension 

 
IF YOU FIND ANY OF THE PREVIOUS CONDITIONS OR ANYTHING ELSE THAT YOU 
FEEL COULD CAUSE HARM TO ANY USER, THE TRAMPOLINE SHOULD BE 
DISASSEMBLED OR SECURED FROM USE UNTIL THE CONDITION(S) HAS BEEN 
RESOLVED. 
 

WINDY CONDITIONS 

In severe wind situations, the trampoline can be blown about. If you expect windy weather 
conditions, the trampoline should be moved to a sheltered area or disassembled. Another 
option is to tie the round, outside portion (top frame) of the trampoline to the ground using 
ropes and stakes. To ensure security, at least four (4) tie downs should be used. Do not just 
secure the legs of the trampoline to the ground because they can pull out the frame sockets. 
 
 
 
 

Summary of Contents for JP02-R01-120
































Reviews: