JUMO LOGOSCREEN, Operating Instructions Manual

Page: 33 / 68

33
3 Operation and visualization
3.2.8 Batch reports
Batch reporting enables the creation of a flexible form to describe a batch
process within the recorder. It can only be run parallel to an external report and
is active when the parameter Configuration
➔
Report/Batches
➔
Ext.Report/
Batches
➔
Status has been configured to “E.R.+batches”.
Batch reporting (external report) can be controlled through one of the digital
signals. The selection is made using the parameter Configuration
➔
Report/
Batches
➔
Ext.Report/Batches
➔
Control signal.
Two different screen representations are available for batch reporting:
- current batch report and
- completed batch report
H
The batch reporting function is described more fully on the
following pages.
The batch report shown only serves as an example.
It can be adapted to match your specific requirements through
reconfiguration.
Please note that, depending on the user, specific functions can be
disabled through the PC Security Manager Software (PCS).